7,729 parts and counting

Koyo K35X40X27H — catalogue photograph of the needle roller bearing family

Koyo K35X40X27H needle roller and cage assembly

Koyo K35X40X27H needle roller and cage assembly: roller bore diameter Fw 35 mm, width 27 mm, basic dynamic load rating Cr 29.8 kN; cross-references: IKO KT354027C3, INA K35X40X27TN.

Needle roller and cage assemblies · All Koyo part numbers

Figure © Koyo, clipped unaltered from Koyo Ball & Roller Bearings catalog B2001E-6 — Standard Bearings section (B2001E-6b). It illustrates the product family printed there, which may include other sizes. Removed on request.

Koyo K35X40X27H — catalogue photograph of the needle roller bearing familyKoyo K35X40X27H — catalogue drawing of the needle roller bearing family
Koyo K35X40X27H: roller bore diameter Fw 35 mm, roller outside diameter Ew 40 mm, width Bc 27 mm, drawn to scaleFw 35 mmEw 40 mmBc 27 mm
Drawing: BearingLookup, to the printed roller bore diameter Fw, roller outside diameter Ew and width Bc cited in the specifications below; internal detail is illustrative.

Specifications

Roller bore diameter Fw35 mm
Width27 mm
Basic dynamic load rating Cr29.8 kN
Shaft diameter35 mm
Roller outside diameter Ew40 mm
Basic static load rating C0r59.6 kN
Limiting speed, grease lubrication7900 min-1
Limiting speed, oil lubrication12000 min-1
Mass0.037 kg
Product typeRadial needle roller and cage assemblies, metric series

All specifications: Verified printed in Koyo’s own catalogue

Cross-references

PartManufacturerRelationshipEvidence
IKODimensional interchangeSingle source stated by Koyo; not corroborated
INADimensional interchangeSingle source stated by Koyo; not corroborated

Koyo: 'Dimensional interchangeability only. This does not imply interchangeable in all respects.' (Metric NRB Interchange Guide p18)

Documents

Documents open on the publisher's own site; we link them and never host a copy.

Related parts

Sources